Tip 1: How to register a poppy address
Tip 1: How to register a poppy address
Poppy-address is a kind of identifier that is assigned to the network equipment. It is needed to configure the network and connect to the Internet. But sometimes there is a need to change theaddress, for example, if he simply stumbles. And to restore the normal operation of the network, it must be re-registered.
You will need
- - A computer running Windows (XP, Windows 7).
Instructions
1
Owners of Windows 7 operating systems write mac-address can in this way. Click "Start". Go to the "Control Panel". Select the "By Category" view. Then click on the "Network and Internet" component. After that, select "Network and Sharing Center". On the left side of the window, click the "Change adapter settings" option.
2
You should see a window with thelocal network ". Click on this icon with the right mouse button. A shortcut menu will appear. In this menu, select Properties. A window will pop up. The topmost section of this window is called "Connect Through". At the bottom of the section is a line with the name of your network card. When you move the cursor over it, you will see a poppyaddress network card.
3
Nearby is the button "Configure". Click on this button. In the next window, go to the "Advanced" tab. Then find the "Property" section. In this section there is a line "Network address". Select it with the left mouse button. On the right is the "Value" line. Enter in this line the requiredaddress and click OK. Now the poppyaddress registered.
4
In the case of Windows XP operating systemTo make it it is possible so. The general principle differs little from the case with Windows 7. On the control panel, select "Network connections". The "Local Area Connection" icon appears. Click the icon with the right mouse button and select "Properties" from the context menu.
5
Then go to the "General" tab. A window will pop up. The topmost line in it is the model of your network card. Click the "Configure" button, which is next to it. Then go to the "Advanced" tab. In the next window, find the line "Network address". Select this line with the left mouse button. On the right is the string value. Enter there mac-address. Then click OK. Now the poppyaddress registered. You can close other windows.
Tip 2: How to get mac address
MAC-address Is a unique identifier written in the form of a hexadecimal number, which is assigned to the network equipment by the manufacturer. Stored address in the chip EEPROM - ROM. With it, you can define a computer on the network, for example, to assign a dynamic IP-addressa.
Instructions
1
Sometimes MAC-address recorded on the network card or on thenetwork card. Otherwise it can be learned by means of Windows. From the Start menu, start the command prompt with the option "Run". In the Open box, type cmd and confirm with OK. In the console window, type ipconfig / all. The command will display full information about the network adapter.
2
The item "Description" contains the name of the network card, and "Physical address"- MAC-address. If the network cable is disabled, in the line"Network Status", the message "Network Disabled" appears. If there are multiple network adapters in the system, the same number of text blocks will be output, which contain information about each device.
3
There is another way to learn the MAC-address. From the "Start" menu, go to "Control Panel". Double-click the "Network Connections" icon to expand the folder. To right-click the shortcut menu, click the "Local Area Connection" label. Select the "Status" option. In the status window, go to the "Support" tab. In the line "Physical address»The MAS-address network card.
4
To learn the MAC-address remote computer, you can usewith the arp command with the -a option. From the Start menu, run the command prompt by clicking Run, and type cmd. In the console window type: ping IP_comp or ping comp_name, where IP_comp is IP-address, and comp_name is the name of the remote computer. After the packet exchange between the network devices, enter arp -a. In the line "Physical address"The MAC-address remote computer.
5
For the same purpose, you can use the commandipconfig if you have access rights. Call the management console through the command line. Enter ipconfig / s comp_name (comp_name - still the name of the remote computer on the local network).
6
If necessary, the MAC-address can be changed by means of Windows. In the "Device Manager", expand the list of network devices and right click to open the shortcut menu by the name of the adapter. Select the "Properties" command and go to the "Hardware" tab. Find the "Network address"And in the" Value "window enter the desired numbers, without spaces and hyphens.
