Tip 1: How to sew women's pants
Tip 1: How to sew women's pants
Women in Europe began to wear pants In times of emancipation. Since then, from the clothes of brave women, they have become a standard element of the costume. They can be worn as an official event, and in an office or for a walk. The choice of trousers to the case depends on the fabric from which they are sewn. The overall technology of trousers is based on the following principles.
Instructions
1
First measure and record the followingparameters: waist circumference, hip circumference, knee girth, bottom width, length at the side seam (from waist to bottom), seat height (from waist to sub-sciatic fold, length of step (from fold to floor), knee height, width of front half and The width of the back halves: Tightly wrap a centimeter around the measured part.
2
Download and change the pattern according to your size. Print, sweep and cut, taking into account the allowance for seams. Process the edges.
3
Sweep out the pattern details and try on. If everything is in order, stitch and iron the details from the wrong side.
Tip 2: How to sew women's shorts
Shorts, Like pants, were borrowed from the maleWardrobe for a long time and for a long time. They are worn both in summer and in the cool season, on the beach and in the office. Using the same pattern of shorts, you can sew a variety of models for work and leisure.
You will need
- - 60-80 cm of fabric;
- - thread in the tone of the fabric;
- - 12 cm long zipper;
- - 1 button;
- - non-woven fabric;
- - sewing machine.
Instructions
1
Pick up the fabric. For tailoring shorts suit light trouser fabrics: gabardine, crepe, papillon, linen, knitwear and so on.
2
Peresmite the pattern of shorts from the journal with a tracing paper or build it according to your standards based on the basic pattern of trousers.
3
Place the paper pattern on the fabric foldedtwice the front side inward. Outline the details of the circumference of the tailor's chalk, mark the allowances on the seams: on the hem of the bottom 3-4 cm, on the remaining sections - 1.5 cm. Cut out the details along the drawn lines.
4
Details of the belt, pockets valves duplicate nonwoven. Glue it with a warm iron to the fabric and cut along the contour.
5
First, grind the lines of darts and grind them on the typewriter, and do not make the seam on the top of the seam, but tie the threads to a knot. Press the darts towards the middle.
6
Wrap the allowances for the side seams in the rear andFront halves and cuts of sack pockets. Pin along the entrance to the pocket on each part of the transfer and set the burlap, aligning the cross marks. Pritachayte them close to the marked lines of seams.
7
Execute the side seams, while leaving the entrances in the pocket unprotected. Stitch the burlap pockets. Each half fold inward and stitch the seam.
8
Paste the shorts in each other's pants, align all the seams and stitch to the fastener label.
9
The hardest thing is to sew a zipper, but ifperform all the instructions, then everything will turn out. Obtachku right edge prikolite to the right edge of the cut and prityachte top along the middle of the transfer to the mark. Unscrew the bottom edge of the obtack up and iron. The left edge of the incision is ironed on the wrong side and prikolite to the braid of lightning close to the teeth, sweep and pritachayte on the sewing machine.
10
Patch the right edge of the cut prikolite to anotherParts of the fastener, without grasping the fabric of the front half. Lightning prick to obtachka. Lay along the marked line a decorative stitch on the right half, slightly grasping the obtack.
11
Stitch the side cuts on the belt. Fold the upper sides (duplicated with non-woven fleece) and the lower part of the waistband with the front sides, and cut off the lateral and upper sections. Angles cut obliquely close to the line. Seam allowances are also cut.
12
On the inside of the belt, treat it withseam the bottom section. The outer part is put on the shorts, grind and pritachayte. Turn it to the front. The upper edge of the shorts should be stitched into the seam of the belting.
13
On the right side, sweep the loop using a special sewing machine foot or a manual stitch. On the left, sew a flat button.
14
Sweep the allowance to the hem of the bottom, press it on the wrong side and sew it with secret stitches. Finished shorts iron.
