LovesTheTeam.com

You will need

• - computer (to make a layout),
• - jet printer,
• - paper for sublimation printing,
• - thermoscatch,
• - thermo-press for mugs,
• - a special mug for sublimation printing,
• - mittens for working with hot objects.

Instructions

1

If you want to get one mug withphoto, for example, for a gift, the easiest way is to go to the printing house and order there such a service. It is worth printing on one mug is very inexpensive. The product will quickly be ready, experienced professionals will print everything qualitatively. You will only have to take the result and use it for the intended purpose.

2

You can print an image on a mug andyourself. But this will require special expensive equipment, which is usually only available in specialized workshops or print shops. But if you have it, boldly proceed. So you can even organize your own business.

3

Make a layout for printing the required size. Its parameters should not exceed the height of the circle and the amount of its girth. Also find out the maximum width of a press on which the thermopress is capable. Lay out the layout in all these restrictions. Do not forget to unfold the image in a mirror. Now print the resulting layout on the inkjet printer.

4

Wait for a while until the ink is drycompletely. Now cut the picture, getting rid of the white fields. Fix to the mug what happened with a thermoscitch. Make sure that the paper is everywhere close to the surface.

5

Now put the mug in the thermo-press,The printing characteristics provided by the specific equipment model. Turn it on and wait for the right time. When the press warms up, use it, pressing the picture to the mug. Wait as long as required by the instructions, then take out the mug. When the mug is cool, paper and scotch can be removed. The approximate time of making one mug is 10 minutes.

Instructions

1

Correct fit and position of armsthe well-being of the person working at the computer depends on whether he is sitting properly. The chair should have a back that supports the spine. Legs should stand on the floor - so that the feet are parallel to it. To ensure that your hands do not get tired when typing, the keyboard should be at the level of the elbow, as well as the mouse.

2

Wrist should not bend up, down, or intoside. It is desirable that the keyboard was with a palm rest. It is recommended to print on ergonomic keyboards. One of the well-proven options is Microsoft Natural Ergonomic 4000.

3

When typing, relax your fingers after pressingon the key: tension provokes fatigue and spasticity of muscles. Relax the brush and work with the mouse: try to move not only the wrist, but the whole hand. To train the arm muscles and prevent tunnel syndrome, use the Power Ball simulator. Additional loads are also useful: playing the piano, guitar, badminton, tennis.

4

Select layout To learn the quick print skills, it is important to select a permanent layout for keyboard. One of the most popular Russian-speakingThe "Russian Standard" (fyva-oldzh) and "Russian Typewriter" are used. In the second variant, you do not need to press shift for the punctuation set, and the point and comma fall on the strongest fingers (index). By default, the operating system offers the "Russian Standard" layout.

5

Solo on the keyboard Complete a hundred exercises of the course"Solo on the keyboard." The author of this program is a psychologist and journalist, teacher of the Faculty of Journalism of the Moscow State University Vladimir Shahidzhanyan. This program will not only allow you to master the blind ten-finger method, but also better understand yourself and your life. The keyboard simulator is combined with personal training. "Solo on the keyboard" can be installed on the computer, and you can go to http://nabiraem.ru/. Shahidzhanyan advises to deal with the paid licensed version, tk. With this approach, the effectiveness of the classes will be higher.

6

All life is a gameWhen you confidently masterblind method of dialing, you can proceed to increase the speed. The site http://klavogonki.ru/ offers to combine training with an exciting game. Here you can print texts in different modes (regular, error-free, marathon, etc.), while gaining points. Regular competitions ("iks") and events ("Big Races", "Hexatlon", "Formula-1", "Formula-2", "Grand Prix", "League of Maniacs" and many others) are held regularly. Competitive races can be organized and most, but participation in them costs a certain number of points.

You will need

• - a computer;
• - A program that teaches blind dialing on the keyboard.

Instructions

1

Set yourself the task of mastering the blindten-finger method of printing. This method is most effective when typing on the keyboard, while you save time, and the number of errors in typed text is gradually reduced.

2

If the program is invited to take the exercisesby the method of "from simple to complex," be patient and perform all tasks in order. The passage of all the exercises can take from several days to a year and even more, everything will depend on your desire to learn how to print and the availability of free time that you devote to pursuits. Follow all the recommendations of the program, do not be lazy to go through exercises in which fast punctuation marks and numbers are processed. They are often found in texts, but their set significantly reduces the speed of printing, because the keys on the keyboard are not so convenient as letter keys.

3

If your work is related to a permanent settext, get a special ergonomic keyboard. The keys on this keyboard are divided into two hands, so you will not confuse which hand and which finger you need to press this or that key. Thanks to the special keyboard design, your hands will be much less tired than typing on a regular keyboard or laptop keyboard, which will also increase the speed of printing.

4

Use the skills of blind printing obtained withwork with the program. Try to type as much textual information as possible every day. Gradually increase the speed of dialing, paying attention to the number of errors. If there are more errors, go back to the previous speed and reduce the number of errors. Sometimes, the speed of printing should be minimized, so that the fingers can "work out" pressing the right keys and not miss.

Instructions

1

Let's start with what you can download from the Internetany program for training high-speed printing (for example, "Solo on the keyboard"). The minus of these programs is that they require regular classes, and these lessons can hardly be called interesting and fascinating. You can learn how to type blind blindly much quicker and easier if you subdivide the keyboard visually into three horizontal areas - according to the three lines of letter keys.

2

Look at the keyboard - find on the F and J keys(A and O in the Russian layout) protruding from the plastic point or bumps. The first time you can focus on them, determining the location of your fingers on the keyboard.

3

Place the index fingers on the keys A and Dboth hands, and place the remaining fingers on the following keys: middle, nameless and little finger of the left hand put on the keys B, N and F, and right middle, ring and little finger place on L, D and J. Enter and Space keys you will find without problems to the touch - their location is known by everyone, and also they have non-standard in relation to text size keys.

4

Print blindly a combination of letters locatedon the keys to which you put your fingers (FIVE and OLDJ). Put a space after each combination, without looking at the keyboard. When you feel that these combinations of signs are given to you easily, start adding letters that are in close proximity to your combinations, on the same horizontal of the keyboard (for example, P and P).

5

To reach the Caps Lock key, you can use the little finger of your left hand, and to the E key you can reach the little finger of your right hand.

6

Go to the top of the keyboard andpractice blindly typing the combinations of the CCTC and GGSHZ, and then insert the keys between these combinations. On the bottom horizon, also type combinations of letters similar to those we mentioned above.

7

Continue to repeat in differentcombinations of the lower and upper horizontal. Start printing slowly - after training, you can speed up printing. Practice getting the little fingers of both hands to the keys with letters located on the edges of the contours - I, Yu, B, C, and others. Then learn how to quickly insert punctuation marks, holding down the Shift key when you set them.

You will need

• Installed Microsoft Office Word.

Instructions

1

Open the Borders and Fills dialog in Microsoft Office Word. To do this, use the same item in the "Format" section of the main menu. Switch to the "Page" tab of this dialog.

2

Specify the type of the shape and the border type. Use the mouse or the TAB key and the cursor buttons to activate one of the icons labeled "no", "frame", "shadow", "volume" and "other" located on the left side of the dialog. Select one of the items with examples of borders in the "Type" list.

3

Set the color of the border lines. Click on the drop-down list "Color". A panel with a set of buttons appears. Click on one of them or choose "Other line colors ..." to display a dialog with which you can perform an arbitrary color setting.

4

Specify the width of the border lines. Click the "Width" drop-down list button. Select the item with the desired value.

5

Define the range of document pages on whichthe frame with the specified parameters should be displayed. Expand the "Apply to" drop-down list. Select the item that corresponds to your preferred option.

6

If necessary, specify additional options,affecting the display of the frame. Click on the button "Options ...". The "Boundary and Fill Settings" dialog opens. Enter in it the values ​​of the margin indents from the edges of the page or text (determined by the drop-down list "Relative"). Activate, if necessary, options in the "Parameters" group of controls.

7

Apply the changes made by clicking the OK button in theopen dialogues. Check that the frame is displayed properly. If necessary, create the contents of the document by entering text, adding images, auto-figures, etc.

8

Type frame. From the main menu, select "File" and"Print" or press Ctrl + P. In the displayed dialog, specify the target printer and specify, if necessary, additional output options for the document. Click OK. Wait until the printing process is complete.