Tip 1: How to learn to type blindly
Tip 1: How to learn to type blindly
In the Age of Internet and Information Technologyit is difficult to find people who have never worked on a computer, but despite this, there are a lot of novice users experiencing some difficulties in mastering the computer and its functions. Often, such difficulties arise due to the speed of printing on the keyboard. High-speed blind printing is an extremely convenient and valuable skill that will save your time and make the typing process quick and inconspicuous. As a person who prints slowly and hesitantly, acquire the skill of blind printing?
Instructions
1
Let's start with what you can download from the Internetany program for training high-speed printing (for example, "Solo on the keyboard"). The minus of these programs is that they require regular classes, and these lessons can hardly be called interesting and fascinating. You can learn how to type blind blindly much quicker and easier if you subdivide the keyboard visually into three horizontal areas - according to the three lines of letter keys.
2
Look at the keyboard - find on the F and J keys(A and O in the Russian layout) protruding from the plastic point or bumps. The first time you can focus on them, determining the location of your fingers on the keyboard.
3
Place the index fingers on the keys A and Dboth hands, and place the remaining fingers on the following keys: middle, nameless and little finger of the left hand put on the keys B, N and F, and right middle, ring and little finger place on L, D and J. Enter and Space keys you will find without problems to the touch - their location is known by everyone, and also they have non-standard in relation to text size keys.
4
Print blindly a combination of letters locatedon the keys to which you put your fingers (FIVE and OLDJ). Put a space after each combination, without looking at the keyboard. When you feel that these combinations of signs are given to you easily, start adding letters that are in close proximity to your combinations, on the same horizontal of the keyboard (for example, P and P).
5
To reach the Caps Lock key, you can use the little finger of your left hand, and to the E key you can reach the little finger of your right hand.
6
Go to the top of the keyboard andpractice blindly typing the combinations of the CCTC and GGSHZ, and then insert the keys between these combinations. On the bottom horizon, also type combinations of letters similar to those we mentioned above.
7
Continue to repeat in differentcombinations of the lower and upper horizontal. Start printing slowly - after training, you can speed up printing. Practice getting the little fingers of both hands to the keys with letters located on the edges of the contours - I, Yu, B, C, and others. Then learn how to quickly insert punctuation marks, holding down the Shift key when you set them.
Tip 2: How to learn to type blindly on a keyboard
Learning to print without peeking at the keyboard is relatively simple. It is necessary to have a share of enthusiasm and enough free time for regular practices.
Difficulty typing for a beginner
Anyone who encounters a computer is the firstdeeds find it necessary and difficult to type the text. Since you need to enter at least a question (or a search query) to get any information, then get the result on your screen. The letters on the keyboard are not arranged in alphabetical order - this is clarified on closer inspection. For the beginner, their order may seem messy at all, and, in other words, pointless. But everything has its own explanation, and the creators of the first printing devices-typewriters (and later computer keyboards) -are arranged the letters of the alphabet, guided by well-defined laws. The more often a letter is used in the text, the closer to the center it is located on the keyboard.What is the method of blind recruitment and how to learn it
The method of blind recruitment is a conscioustraining your fingers to print the intended text, not peeping at the same time on the keyboard. In the typing, all ten fingers of two hands are involved (and not as usual for beginners: one / two index fingers). You can learn ten-finger method of blind typing with the help of simulators. These are specially developed applications that allow you to type interesting texts to music. Such training programs can easily be found in search engines and pick up to taste exactly the one that will be interesting to you. Moreover, all these programs, as a rule, provide a test lesson. Such applications are usually inexpensive. And the skills received after training are really worth the money. After all, even after successfully completing the course, you can continue training by increasing the speed of printing. The first and main thing that simulator programs will teach is the correct arrangement of hands on / above the keyboard. The second point is the tactics of typing, which will not permanently tire of the tension of the hand. After that, the practice of "blind" recruitment begins. Naturally, everything begins with one letter, then two, after the syllables are worked out, simple words, compound words and sentences. Classes are divided into lessons, after which points are awarded. If you do not get a passing ball, the task will have to be done again and again to get the right rating. Modern training programs try to diversify classes so that they do not become routine repetition, do not bother. A ballroom system, which requires a set of certain points for the transition to the next task, awakens the spirit of competition in a person, pushing to achieve the best result.Tip 3: How to learn to type on the keyboard
The method of blind printing on the keyboard appeared inThe times of typewriters, it was designed by Vladimir Shahidzhanyan and printed in magazines. Now you can learn how to work on the keyboard blindly using a special program.
Instructions
1
Follow this link
2
Wait for the program to load and install it on your computer.a computer. Run the program. It consists of a hundred sets of exercises. To quickly type on the keyboard, remember the basic rules of blind printing: never look at the keyboard during classes, since your fingers should remember the keys, not the eyes.
3
Do not seek to immediately dial the speed dial,watch for the absence of errors. It is better to go through all the exercises on the "5", in order to learn the blind seal faster. Also it is necessary to adhere to the basic position of the fingers on the keys: the fingers of the left hand are above the FIVA keys, and the right one above the OLDJ keys. Press spacebar with your thumb. If the last letter before the space is typed by the left hand, then you type the space on the right, and vice versa.
4
Do all the exercises of the program in turn. They are built in successive mastering of all the keys of the keyboard in rows, first the middle, then the upper and lower. Then the numbers and punctuation marks. Go through several exercises a day, develop a system to learn how to type blind method on the keyboard. Do not be nervous if an error message pops up, calmly perform each exercise and take your time.
5
Use similar programs to learn how to quickly type on the keyboard, for example, the program "Stamina", the official website -
Tip 4: How to learn to type fast
The ability to quickly type on the keyboard greatly facilitates the life of those who on duty ought to gain large amounts of text. This saves time, and keeps the nervous system. How will you learn how to type quickly?
Instructions
1
More practice. The more often you type the texts, the quicker you remember the arrangement of the letters on the keyboard. Actively exchange messages with friends in an agent or Skype, take your favorite book and type text from it. Or write down your thoughts in the Wrdd file - for example, dreams or how you would like to spend the weekend.
2
The method is blind. Take an old keyboard with erased signs or seal the inscriptions on the keys with thick self-adhesive paper. Over time, you will find yourself thinking that you no longer need to look at the keyboard, the fingers themselves press the desired sign.
3
10 fingers. Use both hands to work on the computer. The initial position - the left and right thumbs lie on the "space" key. All the rest are in the middle of the keyboard. When typing, each finger clicks on certain characters.
4
Mentally divide the keyboard horizontally intotwo parts. The fingers of the left hand "walk" along the following signs: the little finger - F, Y, I, the unnamed - N, C, C, the middle - B, U, C, the index - A, K, E, M, I, P. Fingers right hands press these letters here: the little finger - Ж, Э, Х, Ъ, the unnamed - Д, З, Ю, the middle - Л, Б, Щ, Ш, the index - О, Р, Г, Н, T. All other keys distribute on your fingers at your own discretion, as it will be convenient for you to reach out to them. A few days of training and you will succeed.
5
Keyboard simulator. Install one of the quick-print programs on your computer. For example, "Alenka" or "Solo on the keyboard". Such programs are convenient because they adjust to the student, calculating the "problem" places and causing more often to press signs that you can not find for a long time.
6
Having studied the arrangement of the characters on the keyboard,develop the speed of printing. This can be done with the help of the same training programs or competing with one of your friends, type texts for a while. Set your speed record.
